UB1250 Universal Power Group Sealed Lead Acid Battery UB1250 12V 5Ah UB1250 UPG SLA Battery (PS-1250
	Quantity in Basket: none Code: UB1250 Price:$10.50 Shipping Weight: 4.09 pounds Length: 3.57" Width: 2.75" Height: 4.00"
	Terminals:
	Quantity:
Terminals General Specifications Dimensions: Length 3.54 inches 90 millimeters Width 2.76 inches 70 millimeters Height 4.02 inches 102 millimeters Height over Terminals 4.21 inches 107 millimeters Approximate Weight 4.10 pounds 1.90 kilograms Terminals: Quick disconnect tabs (0.187" x 0.032") Quick disconnect tabs (0.250" x 0.032") Case: ABS Plastic Electrical Specifications Nominal Voltage: 12 Volts (6 cell in series) Nominal Capacity: 20 hour rate (250mA to 10.50 volts) 5.0 AH 10 hour rate (470mA to 10.50 volts) 4.7 AH 5 hour rate (900mA to 10.20 volts) 4.5 AH 1 hour rate (3800mA to 9.00 volts) 3.8 AH Energy Density (20 hour rate) 1.53 Watt-hours/cubic inch 93.4 Watt-hours/l Specific Energy (20 hour rate) 14.5 Watt-hours/pound 32.0 Watt-hours/kg Internal Resistance (Fully Charged Battery) 17.3 milliohms (approx.) Charging Cycle Applications: Limit initial current to 1000mA. Charge until battery voltage (under charge) reaches 14.40 to 14.70 volts at 68� F (20� C). Hold at 14.40 to 14.70 volts until current drops to approximately 50mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to "float" voltage. "Float" or "Stand-by Service": Hold battery across constant voltage source of 13.50 to 13.80 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.